How To Clean Top Scanner Rollers Brother L2700dw Black Ribbon Is Twisted

Brother strongly recommends that customers use only 18-carat Brother pulsate units and/or toner cartridges. Each Brother laser printer is designed to work at pre-ready temperatures that are matched exactly to each of our private toner formulations. Each private component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality, and machine reliability. The Blood brother express warranty does not utilise to any problem that is acquired by the use of tertiary political party drum units, toner cartridges, or toner.

- Click hither for video instructions.

i. This issue is usually resolved past cleaning and/or replacing the drum.

2. Perform a manual drum cleaning.

a. Open the forepart cover and remove the pulsate and toner assembly.

Annotation: Nosotros recommend that yous place the drum unit and toner cartridge assembly on a piece of newspaper in case y'all accidentally spill or besprinkle toner.

b. Button downwardly the dark-green lock lever on the left side of the drum unit and toner cartridge assembly and then lift the toner cartridge out of the drum unit.

NOTE: Handle the toner cartridge carefully. If toner scatters on your hands or apparel, immediately launder information technology off with cold water.

c. Inside the pulsate unit is a roller. Clean the roller by gently wiping the entire surface with a lint free fabric or cotton swab lightly moistened with isopropyl alcohol (91% force alcohol is preferred, but lxx - 75% strength booze is besides acceptable). You tin can also use an alcohol swab, such as a medical booze pad or wipe, which can be establish in a get-go aid kit. Use the white gear on the far left side to plough the roller and ensure you make clean the entire surface.

Every bit a precaution please annotation: Isopropyl alcohol is combustible and should exist kept away from fire or flame.

- If physical harm, such as scratches, nicks or gashes in the surface of the pulsate, is institute when inspecting the drum, there is no need to continue cleaning since information technology volition not resolve the issue. Become to Footstep 5.

d. Before standing further, let the booze to evaporate or dry out off the pulsate surface.

e. Once the pulsate surface is dry out, clean the primary corona wire inside the drum unit of measurement by gently sliding the green tab located at the superlative of the drum unit from left to right and back several times. Be sure to return the dark-green tab to the home position.

f. Reinstall the toner into the drum (be sure it clicks into place). If you lot put information technology in properly, the greenish lock lever will elevator automatically.

chiliad. Reinstall the pulsate unit and toner cartridge assembly into the automobile, shut the front end encompass, pressing firmly on each side until the embrace clicks into place.

three. Print 10 to 15 blank pages from the computer to further clean whatsoever remaining droppings left on the pulsate surface.

4. Impress the Test Impress:

a. Press the UP OR Downwardly Pointer key to select Auto Info. Printing the OK key.

b. Press the Up OR DOWN Arrow cardinal to select Exam Print. Press the OK fundamental to print the Exam Print.

- If no blackness vertical lines appear on the report, the issue is resolved.

- If blackness vertical lines nevertheless appear on the Printer Settings page(s), a second manual drum cleaning may be needed. Echo STEPS two - four.

- If there are withal black vertical lines after doing two (2) manual drum cleanings, the pulsate (DR630) needs to exist replaced. Continue to the next step.

5. If the issue is not resolved or the pulsate is scratched/damaged, the pulsate unit of measurement volition need to be replaced. The upshot is probable acquired by a strange object or material getting within the auto or use of improper impress materials and dissentious the pulsate. This is likely not a manufacturing defect and is not covered under warranty. The drum (DR630) needs to be replaced.